A whole house remodel in the Bay Area costs $200 to $400 a square foot on our 2026 jobs, sometimes less. Past that, it’s a choose-your-own-adventure. One family does a bathroom, freshens up a couple of bedrooms and puts in new floors. The next takes the house down to its framing. Either way, some of the biggest costs are things you’ll never see.
What a whole house remodel costs in the Bay Area
Here’s what a home renovation costs in the Bay Area, piece by piece. Add up the pieces you want and you have a rough number for your house. Then check it against the whole house remodel cost per square foot: $200 to $400 on our jobs. Our whole-house jobs start at about $100,000.
There’s no standard whole-house remodel. Most include at least a bathroom and a couple of other rooms, often the kitchen, and almost always new floors. An addition plus a remodel is its own kind of job, and it isn’t priced here.
The rooms
Kitchen: about $20,000 to $100,000 and up. The house sets most of that range: whether the layout changes, what’s under the floor, and whether the panel can carry a modern kitchen. What drives kitchen cost has its own post.
Bathroom: about $20,000 to $80,000 and up. The layout drives it. A refresh in the same footprint sits at the bottom; moving the toilet or shower, or going curbless, sits at the top. Bathroom costs have their own post too.
A room spruce: about $3,000 to $7,000 a room. Paint, trim and wall repairs, and maybe new light fixtures and switches. That’s the whole list.
The floors
A whole-house remodel usually gets new flooring throughout. The furniture has to come out anyway, and with the house already empty, it’s the easiest time the floors will ever be to replace.
Refinishing the hardwood you have: $6 to $10 a square foot. That’s the hardwood floor refinishing cost on our jobs.
New hardwood: $12 to $25 a square foot, with the old floor pulled up. The wood, solid or engineered, and what turns up under the old floor move the number.
Paint
$2 to $4 a square foot of wall for an easy job. $5 to $8 with heavy prep. Paint is almost all labor, and most of the labor is prep: patching cracks, sanding, caulking and priming before any color goes on. Smooth walls in good shape paint fast. Cracked plaster in an old house takes its time.
The part the house sets
These are the costs you’ll never see, and you don’t get to choose them. The house’s condition does.
Repipe, galvanized to copper: $15,000 to $30,000. Galvanized pipe is still a code-compliant system, and it can legally stay. But it doesn’t last as long as copper. Over the decades it rusts from the inside: buildup narrows the pipe, the water pressure drops, and eventually it starts to leak. When we cut out old galvanized, the inside is usually caked with rust and debris, and you wonder how anyone was drinking water that came through it.
The cost to repipe a house depends on access and whether the walls are already open; running copper to every shower and sink is a lot of work. With the walls open, replacing it almost always makes more sense than closing them back up around it.
Rewire: $20,000 to $45,000 for the whole house, wall repair and paint included. Knob and tube is still legal. But insurance has gone up a lot, and knob and tube is now a box you check on the application. Homeowners have told me it costs them more to insure. Rewiring is expensive, and it also means you stop paying extra to insure the old wiring. More on house rewiring.
Insulation: $1.50 to $3 a square foot, batts in the walls and R-19 under the floor. On its own, it’s one of the cheapest pieces on this list, as long as the walls are already open.
Windows
Per window, with new trim inside and out: about $2,500 to $3,500 for vinyl, $3,000 to $4,500 for fiberglass, and $3,500 to $6,000 for wood. Most houses have 15 to 20 windows, so this piece adds up fast.
Down to the framing
Our 2019 El Cerrito remodel took the whole adventure. The house was about 1,100 square feet, and every wall and ceiling came down to the original framing. It got new plumbing, heating and electrical, and insulation throughout. Almost none of that work shows now. That was 2019. Priced today, a job like that would land near the top of our range.
The verdict
The rooms you pick decide where you start. The house’s condition sets how far up you go. Plan for both, and start with the pieces you can’t see.
If you’re planning a whole-house remodel, here’s how we run a home renovation from start to finish.
FAQ
Is $100,000 enough to renovate a house?
In the Bay Area, it’s where a whole-house remodel starts with us. $100,000 typically covers a bathroom, a couple of rooms freshened up and new floors. Add a kitchen, or old galvanized pipe or knob and tube that has to go, and you’re past it.
Is $200,000 enough to renovate a house?
Often, for the rooms people care about most: a kitchen and a bathroom, a couple of rooms freshened up and new floors throughout, with room for one hidden system like a repipe. In a 1,000-square-foot house, $200,000 is the bottom of our per-square-foot range.
Is $300,000 enough to renovate a house?
That’s where a whole-house remodel can reach the parts you’ll never see as well as the ones you will: kitchen and bath, floors and paint, plus repiping, rewiring and insulation. In a house of 1,000 to 1,500 square feet, that’s $200 to $300 a square foot.
What drives the cost of a whole house remodel?
The house’s condition, more than the finishes. Old galvanized pipe, knob and tube wiring and uninsulated walls all add cost you won’t see when it’s done. Then the rooms you include, especially the kitchen, and the floors.
The topic
Whole-house remodel cost
Our 2026 Bay Area prices, piece by piece
Facing a decision like this on your own project?
Talk it through with Alex on a free 15-minute call.
Book a 15-minute call (510) 239-7589